Today began the process of installing the OEM quarter panels I purchased in January. But first, more supplies had to be purchased. 3” 36-grit grinding disks 1 gallon of 2k gray primer Three-quarter inch and two inch green masking tape 18” masking paper 8mm spot weld drill bit 3” cutoff wheel The first order of business was to jack the…
I purchased rare original replacement quarter panels for the 1988 CRX. I drove to New York City to pick them up and brought them back to be installed.
Using metal from the first CRX, the rear panel of the '88 from South Carolina was repaired. The doors were also disassembled and the hood was sanded.
Passenger Side Bay Repair
The initial teardown of the recently acquired CRX from South Carolina. I looked at the extent of the rust on the rear panel and quarter panels and determined the best course of action to repair them.
I decided to purchase the 1988 CRX Si from South Carolina. I rented a trunk and towed it all the way to back Pennsylvania.